Featured Products
More Info » Bosch 725cc Injectors $105.00
Now available, the best injector on the market in a smaller size! Whether all motor or turbo, with the control of these injectors you would think your tuning a stock set.
The new Bosch 725cc Feature:
-They are a 48mm long body, shorter than normal injectors. The adaptor tops make them "normal" 60mm length and adapt them to 11mm (B series) or 14mm (K series) orings. The K series guys can run the injectors with no adaptors at all and they are the same length as the OEM rsx injectors so no spacers needed on the rail. The proper battery comp values are also provided with each set so you can set it up in your computer and have consistent a/f ratios as battery voltage fluctuates. Most other injectors don't offer that information at anything other than 1 voltage level.
-Price is per injector and includes the adaptor for the top and an injector clip with pins (order 4 if using on a B-Series or K-Series)
-High Impedance, no need for injector drivers or injector resistors
-High pressure capability, All injectors will run comfortably at 100psi above 10v, flow will be increased by approximately 50% at 100psi
-High duty cycle, with a recovery time of only 1ms, all injectors will run up to 92.5% duty cycle at 9k rpm and 95% duty cycle at 6k rpm while maintaining linearity within 1%
-Excellent low pulsewidth response, linearity within 2% all the way down to 2ms, predictable response down to 1.5ms. Using a 3 dimensional battery comp table with Motec V3 software, low pulsewidth response can be linearized to practically zero flow.
-Excellent consistency, no sets will require more than a 1% trim
-Ruler flat response, unmatched linearity means easy tuning and accurate compensations.
More Info » Cobalt "EcoTechnik" Turbokit $3,995.00
We are proud to announce the release of our Ecotechnik Big Turbokit for the 08-09 Cobalt SS/TC. After months of developing and testing the kit, it is now finalized and ready for pre-orders. The heart of the kit is a Garrett Ball Bearing series GT2871r. We choose this turbo for its quick response, recovery time, and great top end when matched with a proper exhaust manifold. Next we gave the very difficult task of creating a tubular manifold in such tight constraints to our master fabricators. After weeks of work we were able to design a high flowing tubular manifold with a true 4-1 merge collector. Matched with a 3 inch stainless steel downpipe, 2.5 inch tig welded aluminum charge piping and a massive 600hp intercooler we instantly had the recipe for big power. We did this all on a bone stock exhaust system to give you a true comparison of our kit vs. the stock setup. Stock numbers were 240whp 260wtq, Ecotechnik numbers 371whp 383wtq.
The kit includes everything needed to have a true tire burner:
-GT2871r Turbo
-SynapseTurbo Exhaust Manifold
-SynapseTurbo 2 piece Downpipe
-SynapseTurbo Intercooler Kit
-SynapseTurbo 3 inch CAI
-Turboxs BOV
-Custom Oil/Coolant lines
-Hptuners Tuned File
ecoTechnik Cobalt SS by synapseTurbo.com from Morgan Spurgas on Vimeo.



More Info » Motul 8100 5w40 $10.00
Motul 8100 Full Synthetic motor oil is formulated for high performance street engines. 8100 features addatives not found in your typical off the shelf oil that help reduce friction, and provides added protection for your engine components. 8100 helps combat accelerated wear on valvetrain components often associated with aggresive valve springs and cams, as well as deliver more power and reduce operating temperatures.. This 100% synthetic engine oil has been formulated, developed and tested according to the most recent technical requirements of petrol and diesel engines. The new performance ACEA A5/B5 requests fuel economy and low emission performance for powerful engines : MOTUL 8100 X-cess 5W-40 has synthetic base stocks and specific friction modifier molecules that provide an outstanding oil film resistance, reducing friction in the engine, maintaining the oil pressure, and generally decreasing the operating temperature. MOTUL 8100 X-cess 5W-40 provides outstanding lubricating properties such as wear and high temperature resistance and controlled oil consumption. Anti-oxydation, Anti-wear, Anti-corrosion, Anti-foam properties.
More Info » K Series T3 Sidewinder $899.00
The newest manifold in the Synapse Motorsport line up is our K series T3 sidemount manifold.
It comes flanged for Tial 44mm wastegates standard
Tig welded by hand, and completely backpurged
Fitted for EK, DC and EG chassis'



More Info » Tial MV-S 38mm V Band Wastegate $249.99
Tial's best selling 38mm wastegates have been redesigned and are now available with V-banded inlets and outlets. These new wastegates also come in a smaller package, both shorter and slimmer.
Another new feature on these wastegates are the addition of more ports on both the top and bottom sides of the diaphragm. This allows for more versatility in manifold placement.
Features:
-V-band flanges for simple installation and maintenance.
-Shorter and slimmer design allow for fitment in tighter spaces.
-Pinch free diaphragm design.
-3 Pressure Ports on bottom and 2 ports on top.
-Includes with V band flanges and clamps
-No Gaskets
-Leaded Gas Safe Valve
-Tial's renowned reliablity.
-Made in the USA.